flame detector lamp

The mounting arrangement. To operate the test lamp depress the test lamp switch and aim it directly at the detector under test.

Uv Flame Detector Test Equipment

The FSL100-TL test lamp is a rechargeable hand-held IR and UV radiation source that is specifically designed to test Honeywell FSL100 series flame detectors used in safe areas only.

. During this time our flame detectors field-proven mechanical designs have protected customers sites for over 10 and in some cases up to 25. Download the TL105 data sheet. The Salwico 1156 IR Test Lamp is obsolete and is replaced with the Salwico 5100553-00A.

Ad Casă confortabilă - mobilă decorațiuni și accesorii pentru o casă pe gustul tău. IR UV UVIR and multispectrum flame detectors for critical asset protection. The Flame Detector Testers are suitable to test UV UVIR UVIR2 IR IR2 IR3 Hydrogen IR3 Multispectrum IR Flame Detectors.

If you have any questions or would like to know more about which flame detector is best for your needs contact ESP Safety our representatives will assist you in. Flame detectors detect radiation from fires by detection based on UV radiotherapy IR radiation or a combination of the two and they detect and respond to radiations to avoid further damage. The FT194 test lamp activates Safety Systems Technology Triple Mode UVIR optical flame detector at distances of up to 5 feet 15 meters from the detector.

For UV only detectors the maximum distance is up to 8 meters 26 ft. The T-2294P universal UVIR Flame detector Test Lamp activates UV IR en UVIR Flame detector equipment that work at 185-235 nm UV and wide band IR radiation. The original configuration ie.

The TL105 operates up to 35 feet from the flame detector. SENSE-WARE is a manufacturer of Flame Detectors and Test Lamps which sells high quality safety products since 2001. The TL105 is an explosion-proof test lamp that can be used with the FL4000H MSIR flame detector as well as any of the FL3100 Series Flame Detectors.

Det-Tronics has designed and manufactured certified solutions such as SIL 2FMCSAATEXIECEx for hazardous industrial fire and safety environments for over four decades. Ad Casă confortabilă - mobilă decorațiuni și accesorii pentru o casă pe gustul tău. The FT194 test lamp activates Safety Systems Technology Triple Mode UVIR optical flame detector at distances of up to 5 feet 15 meters from the detector.

When the Flame Detector senses the Test Lamp the red LED will blink slowly. The TL105 is an explosion-proof test lamp that can be used with the FL4000H MSIR flame detector as well as any of the FL3100 Series Flame Detectors. Compare this product Remove from comparison tool.

The Sense-WARE T-2294 Flame detector Test Lamp activates UV IR and UVIR Flame detectors that detect at 185-235 nm UV and 44 µ IR radiation. The TL105 is a battery operated test lamp designed specifically to test General Monitors Flame Detectors. The TL105 is an explosion-proof test lamp that can be used with our FL4000H MSIR flame detector as well as any of our FL3100 Series Flame Detectors.

It is supplied in a custom carry case with a dedicated charging unit suitable for mains connection. The instrument is now ready to operate. Ask SENSE-WARE if your flame detector can be tested with the T-2294P.

The multipurpose test lamp is Net Safetys latest design in test lamps and addresses the need to simulate a fire condition when testing any Net Safety flame detector series UVS UVIRS and IR3S Flame Detectors. The TL105 operates up to 35 feet from the flame detector. The Flame Detector Company.

The Model TL105 is battery operated test lamp designed specifically to test General Monitors Flame Detectors. TL-3000 is a IR3 Flame Detector tester for RFD-3000 RFD-3000X Model to verify its response within a short distance. The TL105 operates up.

The detection range is approximately 4 meters 13 ft. SENSE-WARE introduced the 210 series flame detectors in 2012 with the UV Flame detector and UVIR Flame detector. The Salwico 1156 IR Test Lamp comes with an extension rod which makes it.

See the other products. Portable device Specialized for RFD-3000 RFD-3000X Models Suitable. Sensitivity and relay options can be changed by referring to Section 37 and then changing the dipswitch settings located on the bottom of the power board SW1.

The ITES test lamp is used to perform periodic maintenance tests and confirm the response of the flame detectors alarm to a simulated flame once the detectors has been installed. Dont hesitate to contact us if you want some more information about our flame detectors. The TL105 is a battery operated test lamp designed specifically to test General Monitors Flame Detectors.

They are particularly suited for use in connection with general protection of large open areas where fire is expected to spread very rapidly. Alege acum din 3042 produse pe BIANOro. To operate the test lamp depress the test lamp switch and aim it directly at the detector under test.

The TL105 is a battery operated test lamp designed specifically to test General Monitors Flame Detectors. Alege acum din 3042 produse pe BIANOro. For use in safe areas only.

The red LED located inside the detector enclosure will illuminate after the detector. Testing the Detector Using a Test Lamp Test the integrity of your system by using a Test Lamp. The green light may also blink.

As a manufacturer we work with partners. The Salwico 1156 is a IR Test Lamp that is used to test the Salwico NS-DIR IP67 IR Flame Detector. On some Flame Detectors shaking the lamp from side to side or up and down may increase the simulation of flame flicker and improve the response of the flame detector to the lamp.

The TL105 is an explosion-proof test lamp that can be used with the FL4000H MSIR flame detector as well as any of the FL3100 Series Flame Detectors. Testing with an external test lamp is not approved or required. SENSE-WARE is an independent player in the market for industrial flame detection since 2010.

DESCRIPTION The X5200 X5200G and X5200M UV Flame Detectors meet the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources combined with a superior mechanical design. The TL105 operates up to 35 feet from the flame detector. The multipurpose test lamp allows simulation in classified and hazardous locations.

Test Lamp T -2294 for UV IR and UVIR Flame detectors Installation instructions User Guide Specifications Description. Our mission is to supply our customers products that fulfill their needs in the safest and most simple way. Flame Detector Testers Flame Detector Testers are designed to test Flame Detectors with various detecting principles and different mounting positions in maritime offshore and industrial applications.

Flame Detector Tester Solo Smoke Detectors Testers Novus

Flame Detector Tester All Industrial Manufacturers